| ******************************************************************** |
| * Command Description * |
| * ---------------------------------------------------------------- * |
| * AT Check if the command terminal work normally * |
| * AT+RESET Software reboot * |
| * AT+VERSION Get firmware, bluetooth, HCI and LMP version * |
| * AT+HELP List all the commands * |
| * AT+NAME Get/Set local device name * |
| * AT+PIN Get/Set pin code for pairing * |
| * AT+PASS Get/Set pin code for pairing * |
| * AT+BAUD Get/Set baud rate * |
| * AT+LADDR Get local bluetooth address * |
| * AT+ADDR Get local bluetooth address * |
| * AT+DEFAULT Restore factory default * |
| * AT+RENEW Restore factory default * |
| * AT+STATE Get current state * |
| * AT+PWRM Get/Set power on mode(low power) * |
| * AT+POWE Get/Set RF transmit power * |
| * AT+SLEEP Sleep mode * |
| * AT+ROLE Get/Set current role. * |
| * AT+PARI Get/Set UART parity bit. * |
| * AT+STOP Get/Set UART stop bit. * |
| * AT+START System start working. * |
| * AT+IMME System wait for command when power on. * |
| * AT+IBEA Switch iBeacon mode. * |
| * AT+IBE0 Set iBeacon UUID 0. * |
| * AT+IBE1 Set iBeacon UUID 1. * |
| * AT+IBE2 Set iBeacon UUID 2. * |
| * AT+IBE3 Set iBeacon UUID 3. * |
| * AT+MARJ Set iBeacon MARJ . * |
| * AT+MINO Set iBeacon MINO . * |
| * AT+MEA Set iBeacon MEA . * |
| * AT+NOTI Notify connection event . * |
| * AT+UUID Get/Set system SERVER_UUID . * |
| * AT+CHAR Get/Set system CHAR_UUID . * |
| * -----------------------------------------------------------------* |
| * Note: (M) = The command support slave mode only. * |
| * For more information, please visit http://www.bolutek.com * |
| * Copyright@2013 www.bolutek.com. All rights reserved. * |
| ******************************************************************** |
If you are attempting to use an Arduino Nano on a Windows machine and having no luck finding drivers automatically, chances are it is due to a counterfeit FTDI chip which unfortunately does not work with the automatic driver finding functionality in Windows.
The driver under C: Texas Instruments BLE-CC2540-1.1a Accessories Drivers is the serial driver used when the USB dongle is running the BLE application example (for communication with BTool). The driver under C: Program Files (x86) Texas Instruments SmartRF Tools Drivers Cebal win64bitx64 is the driver you need when running the BLE packet. Install CC2540 driver, please refer to the following github link for installation method 2. Use Arduino IDE version 1.8.6 or above, the processor is Atmega328p If you. Contribute to keywish/keywish-nano-plus development by creating an account on GitHub. TI CC2540 Work channel: 2.4G. If the rf-nano driver doesn't properly. Efficient Code Size Architecture, Placing Drivers, Bluetooth ® Low Energy Controller, IEEE 802.15.4 MAC, and Bootloader in ROM; RoHS-Compliant Packages. 4-mm × 4-mm RSM VQFN32 (10 GPIOs) 5-mm × 5-mm RHB VQFN32 (15 GPIOs) 7-mm × 7-mm RGZ VQFN48 (31 GPIOs) Peripherals. All Digital Peripheral Pins Can Be Routed to Any GPIO. BLE-STACK (Support for CC2540/CC2541) - Modified the PID in the driver.inf to match the PID of the dongle. Driver in C:Texas InstrumentsBLE-CC254x-1.4.2.2ComponentshaltargetCC2540USBusbdriver. Changed PID to 16B3 - Then did driver reinstall, pointing to above directory, got msg about unsigned drivers and it installed.
Thankfully, there is a solution if you are running into this problem! Start off by downloading the drivers from the official FTDI site via http://www.ftdichip.com/Drivers/CDM/CDM%20v2.12.00%20WHQL%20Certified.zip (a mirror can be found Here, in case the official link dies in the future).
Once downloaded, unzip the archive and then head to the device manager (Control Panel > Administrative Tools > Computer Management > Device Manager), you should see a device with a yellow exclamation mark next to it labelled 'FT232R USB UART', or possibly a slight variation if using a different FTDI chip. Right click this entry and click Update Driver Software...
Ti Cc2540 Usb Cdc
On the next prompt, choose the option labelled 'Browse my computer for driver software', and on the next prompt choose 'Let me pick from a list of device drivers on my computer'. You will now be presented with a list of device driver types. Highlight USB Serial Converter and click the button labelled 'Have Disk…'
The driver under C: Texas Instruments BLE-CC2540-1.1a Accessories Drivers is the serial driver used when the USB dongle is running the BLE application example (for communication with BTool). The driver under C: Program Files (x86) Texas Instruments SmartRF Tools Drivers Cebal win64bitx64 is the driver you need when running the BLE packet. Install CC2540 driver, please refer to the following github link for installation method 2. Use Arduino IDE version 1.8.6 or above, the processor is Atmega328p If you. Contribute to keywish/keywish-nano-plus development by creating an account on GitHub. TI CC2540 Work channel: 2.4G. If the rf-nano driver doesn't properly. Efficient Code Size Architecture, Placing Drivers, Bluetooth ® Low Energy Controller, IEEE 802.15.4 MAC, and Bootloader in ROM; RoHS-Compliant Packages. 4-mm × 4-mm RSM VQFN32 (10 GPIOs) 5-mm × 5-mm RHB VQFN32 (15 GPIOs) 7-mm × 7-mm RGZ VQFN48 (31 GPIOs) Peripherals. All Digital Peripheral Pins Can Be Routed to Any GPIO. BLE-STACK (Support for CC2540/CC2541) - Modified the PID in the driver.inf to match the PID of the dongle. Driver in C:Texas InstrumentsBLE-CC254x-1.4.2.2ComponentshaltargetCC2540USBusbdriver. Changed PID to 16B3 - Then did driver reinstall, pointing to above directory, got msg about unsigned drivers and it installed.
Thankfully, there is a solution if you are running into this problem! Start off by downloading the drivers from the official FTDI site via http://www.ftdichip.com/Drivers/CDM/CDM%20v2.12.00%20WHQL%20Certified.zip (a mirror can be found Here, in case the official link dies in the future).
Once downloaded, unzip the archive and then head to the device manager (Control Panel > Administrative Tools > Computer Management > Device Manager), you should see a device with a yellow exclamation mark next to it labelled 'FT232R USB UART', or possibly a slight variation if using a different FTDI chip. Right click this entry and click Update Driver Software...
Ti Cc2540 Usb Cdc
On the next prompt, choose the option labelled 'Browse my computer for driver software', and on the next prompt choose 'Let me pick from a list of device drivers on my computer'. You will now be presented with a list of device driver types. Highlight USB Serial Converter and click the button labelled 'Have Disk…'
Depending on your operating system, check for Office updates for PC or Office updates for Mac. If you don't see some of the newer features in your app, you might not have received the update yet or your Microsoft 365 admin restricts Office updates until the features can tested with other programs and add-ins in your organization.
You will now be presented with an open file prompt, click browse and select the file called ftdibus.inf that is in the root folder of the archive we extracted earlier and confirm all the open prompts to install the driver. Avast antivirus free download for windows 10 exe iso.
Now that is done, you will see a new device with a yellow exclamation mark next to it, labelled 'USB Serial Port'. Follow the same steps as we did for the FT232R USB UART device, but this time, when choosing the device driver, select USB Serial Port instead and click the Have Disk.. button:
This time, the driver file you need to select is the ftdiport.inf file that is located in the same root folder of the archive that we used previously. Once again, confirm all the open windows and the driver installation will be complete.
Usb Cc2540 Hid
Now when you load up the Arduino IDE you should see it select the correct COM port and you should now be able to upload sketches to your Arduino Nano.
